2 Yards Navy Broadcloth (often found in the quilting section)
2 Yards White Broadcloth
4 Yards Red Broadcloth
Grommets, setting tools (optional)
I got all the fabric on sale for about $2/yard, so this project cost me under $18. I chose 42” broadcloth because it is lightweight and cheap. These supplies will make 3 54” buntings. Basically, you make a rectangle, accordion-fold it, secure the center, then sew the ends together down the center. I added grommets at the corners, but you can attach string for hanging instead. The grommet kit was an additional $4 at Joanns and included the anvil and setter tools – all you need is a hammer to set them.
1. Wash and dry the fabric to preshrink it. This is important because each fabric shrinks differently. Prewashing also helps prevent color-running.
2. Cut the fabric:
The dimensions are approximate, depending on shrinkage, so I am giving you my measurements after prewashing and shrinking the 42”-wide fabric. Each piece of fabric was cut into equally-sized strips the length of the 2 yards of fabric. I ironed and folded the fabric and used a Fiskars rotary cutter and cutting mat.
White: Cut 6 equally-wide strips about 7 ¼” X 55”
Red: Cut 12 equally-wide strips about 7 ¼” X 55”
Blue: Cut 3 equally-wide strips about 14” X 55”
3. Sew the strips together to make a striped rectangle with the center stripe the color you want in the center-top of the bunting. In this example, I wanted blue at the center-top, surrounded by red and white stripes. Trim it so it is square and finish the edges. I used my Juki serger to make quick work of the edging.
4. Perpendicular to the stripes, accordion-fold in 2½” intervals and pin into place.
5. Sew across the center using a heavy-duty needle.
6. Fan out the ends, pin and sew the center seam.
7. Set grommets in the corners (optional).